



PRODUCTS CENTER

产品中心

Home page

>

Products

>

Direct insertion

>

5MM直插圆头无极双色红翠绿高亮 LED

台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光,指示等领域。

Product description

Application

Technology

Consultation

注：发光颜色、亮度、色温均可按客户要求做货。

Type 规格/型号	Emitting Color 颜色	Material 原材料	View Angle 发光角度	VF(V) 电压		IV (MCD) 亮度		WL(nm) 波长		IF(MA）电流
Type 规格/型号	Emitting Color 颜色	Material 原材料	View Angle 发光角度	Typ	Max	Min	Typ	Min	Max	IF(MA）电流
TM-L03RPG-E （红、黄绿双色）	Red	AlGaInP	25°	1.8	2.4	80	120	620	630	20MA
TM-L03RPG-E （红、黄绿双色）	Yollow Green	AlGaInP	25°	1.8	2.4	30	60	565	575	20MA
TM-L03RB-E （红、蓝双色）	Red	AlGaInP	25°	1.8	2.4	80	120	620	630	20MA
TM-L03RB-E （红、蓝双色）	Blue	IGaN/GaN	25°	2.8	3.4	80	100	460	475	20MA
TM-L03OCG-E （橙、翠绿双色）	Orange	AlGaInP	25°	1.8	2.4	30	60	600	610	20MA
TM-L03OCG-E （橙、翠绿双色）	Green	AlGaInP	25°	2.8	3.4	800	1500	520	530	20MA
TM-L03BCG-E （蓝、翠绿双色）	Blue	IGaN/GaN	25°	2.8	3.4	80	100	460	475	20MA
TM-L03BCG-E （蓝、翠绿双色）	Green	IGaN/GaN	25°	2.8	3.4	800	1500	520	530	20MA
TM-L03OPG-E （橙、黄绿双色）	Orange	AlGaInP	25°	1.8	2.4	30	60	600	610	20MA
TM-L03OPG-E （橙、黄绿双色）	White	IGaN/GaN	25°	2.8	3.4	30	60	565	575	20MA

Supporter shaping：

Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.