



PRODUCTS CENTER

产品中心

Home page

>

Products

>

Direct insertion

>

546椭圆直插LED系列

台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光等领域。

Product description

Application

Technology

Consultation

注：亮度、角度、色温、紫光波段均可按客户要求做货。

Type 规格/型号	Emitting Color 颜色	Material 原材料	View Angle 发光角度	VF(V) 电压		IV (MCD) 亮度		WL(nm) 波长		IF(MA）电流
Type 规格/型号	Emitting Color 颜色	Material 原材料	View Angle 发光角度	Typ	Max	Min	Typ	Min	Max	IF(MA）电流
TM-L546R-E （红光）	Red	AlGaInP	110°	1.8	2.4	400	600	620	630	20MA
TM-L546O-E （橙光）	Orange	AlGaInP	110°	1.8	2.4	500	700	600	610	20MA
TM-L546Y-E （黄光）	Yellow	AlGaInP	110°	1.8	2.4	400	600	585	595	20MA
TM-L546PG-E （黄绿）	Yellow Green	AlGaInP	110°	1.8	2.4	150	350	565	575	20MA
TM-L546CG-E （翠绿）	Green	InGaN/GaN	110°	2.8	3.4	1500	2200	520	530	20MA
TM-L546B-E （蓝光）	Blue	InGaN/GaN	110°	2.8	3.4	1000	1500	460	475	20MA
TM-L546UV-E （紫光）	Purple	InGaN/GaN	110°	2.8	3.4	---	---	365	420	20MA
TM-L546ZB-E （白光）	White	InGaN/GaN	110°	2.8	3.4	1000	2000	2500	21000	20MA

Supporter shaping：

Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be